Adjusting Park Brake

NOTE: The rear brakes must be adjusted correctly before adjusting the park brake cable

1. Park machine safely. (See Parking Safely in the SAFETY section.)

2. IMPORTANT: Avoid damage! Do not overtighten the cable, or the brakes will be preloaded.

   
   TCAL45081-UN-14MAY13

   Adjust the nut (A) on the brake lever cable at the equalizer (B) until the slack in the control cable slide rod and clevis (C) has been removed.

---




3. Check each parking brake cable to ensure the return spring is not fully compressed, if it is, the parking brake linings will need to be replaced.