Checking and Tightening Roll-Over Protective Structure (ROPS) Hardware

CAUTION: Avoid injury! To maintain operator protection and ROPS certification:

• Do not repair or revise the ROPS.

• Any alteration of the ROPS must be approved by the manufacturer.

  1. Park machine safely. (See Parking Safely in the SAFETY section.)

  2. TCAL45095
    TCAL45095-UN-14MAY13

    Remove plug (A) in seat base to access top bolt (B). Access bottom fasteners and top nut from below.


  3. NOTE: Refer to the SPECIFICATIONS section for ROPS torque values.

    Tighten each fastener on both side of ROPS to proper torque.

  4. Install seat base plugs.

DK75838,0000806-19-20150630