Servicing Air Cleaner Element (Gas Models)

IMPORTANT: Avoid damage! Dirt and debris can enter the engine through a damaged filter element:

• Do not wash paper element.

• Do not attempt to clean paper element by tapping against another object.

• Do not use pressurized air to clean element.

• Replace element only if it is dirty, damaged or the seal is cracked.

Checking Air Cleaner Element

1. Raise attachment to service position. (See Using the Lift Cylinder Safety Support in the Safety section.)

2. Park vehicle safely. (See Parking Safely in the Safety section.)

3. IMPORTANT: Avoid damage! Dirt and debris can enter engine when air cleaner canister is opened. Do not open canister unless required for scheduled service, keeping contamination of the intake system to a minimum.

   Check filter element more frequently if operating in dusty conditions.

   
   TCAL45046-UN-14MAY13

   Gently move coolant tank (A) out of the way, release latches (B) and remove air cleaner canister cover (C).

---




4. Visually inspect each element before removing. Replace element only if damaged or dirty.

Replacing Primary Air Filter Element

TCAL45047-UN-14MAY13

1. Remove and discard primary element (E). Replace with a new primary filter element.

2. Install air cleaner canister cover (B).

   • Check instruction molded into canister cover for proper installation.
   • Rubber dust unloading valve (D) must be pointed downward when the cover is properly installed.
   
   

3. Engage latches (A).

Replacing Secondary Air Filter Element

1. Remove air cleaner canister cover.

2. Remove primary air filter element.

3. 
   TCAL45048-UN-14MAY13

   Remove and discard secondary air filter element (E). Replace with a new secondary air filter element.

---




4. Install primary air filter element.

5. Replace air cleaner canister cover.

6. Lower attachment.