Cleaning Oil Cooler

CAUTION: Avoid injury! Compressed air can cause debris to fly a long distance.

• Clear work area of bystanders.

• Wear eye protection when using compressed air for cleaning purposes.

• Reduce compressed air pressure to 210 kPa (2.10 bar) (30 psi).

IMPORTANT: Avoid damage! Cooling fins must be clean to prevent engine from overheating and to allow adequate air intake.

NOTE: Perform this service procedure on vehicles equipped with auxiliary hydraulic kit.

1. Raise attachment to service position. (See Using the Lift Cylinder Safety Support in the Safety section.)

2. Park vehicle safely. (See Parking Safely in the Safety section.)

3. 
   TCT011008-UN-16APR14

   Lift air intake screen (A) from position in front of the engine radiator.

---




4. Remove dirt and debris from the auxiliary hydraulics an oil cooling coils (B) using compressed air or water. Check coils for damage.

5. Install air intake screen.

6. Lower attachment.