Changing Air Cleaner Elements
Changing Primary Air Cleaner Element
IMPORTANT: Avoid damage! Do not disturb air cleaner unless red
plunger is visible in air restriction indicator window.
NOTE: Clean inside of air cleaner cover once removed.
-
TCT010179-UN-23JAN14
Stop engine. Remove cover (A).
-
Remove and discard primary air cleaner element.
-
Install new primary air cleaner element into housing.
-
Install cover with dust unloading valve oriented down.
-
Start engine.
-
Check air restriction indicator.
-
If indicator shows 500 mm (20 in) vacuum or more, replace secondary
air cleaner element.
Changing Secondary Air Cleaner Element
-
Remove cover and primary air cleaner element.
-
Remove and discard secondary air cleaner element.
-
Install new secondary air cleaner element.
-
Install primary air cleaner element.
-
Install cover with dust unloading valve oriented down.
|
OUMX068,0000583-19-20150916
|
|