Adjusting Command Arm

TCT011953
TCT011953-UN-12DEC14

The operator command arm moves with the seat. To maximize operator comfort, adjust the position of the operator command arm (A).

Eccentrics (B) allow for adjustment of the command arm 50 mm (2.0 in.) forward or backward, and up or down relative to the seat base.

  1. Loosen screws on both sides of the eccentrics (B).

    NOTE: Do not remove screws. Only loosen screws until command arm is moveable.

  2. Move command arm to desired position for the operator.

  3. Tighten screws to secure command arm position.

OUMX068,0000AB7-19-20141212