Rollover Protection System (ROPS) - Use and Maintenance

• Never operate the machine without the ROPS installed.
• DO NOT remove the ROPS.
• The ROPS is an integral and effective safety device. Keep a folding ROPS in the raised and locked position and use the seat belt when operating the machine.
• Lower a folding ROPS temporarily only when absolutely necessary. Do not wear the seat belt when folded down.
• Be aware there is no rollover protection when a folded ROPS is in the down position.
• Be certain that the seat belt can be released quickly in the event of an emergency.
• Check the area to be mowed and never fold down a folding ROPS in areas where there are slopes, drop offs, ditches or embankments or bodies of water.
• Check carefully for overhead clearances (i.e. branches, doorways, electrical wires) before driving under any objects and do not contact them.
• Keep the ROPS in safe operating condition by periodically thoroughly inspecting for damage and keeping all mounting hardware tight. Make certain all parts of the ROPS are installed correctly if the ROPS structure is loosened or removed for any reason. All ROPS hardware should be tightened to the proper torque per manufacturer’s recommendations.
• Replace a damaged ROPS. Do not repair or revise. The protection provided by the ROPS will be impaired if the ROPS is subjected to structural damage, is involved in an overturn incident, or is in any way altered by welding, bending, drilling, or cutting. It must be replaced to maintain the manufacturer’s certification of the structure
• The seat is part of the ROPS safety zone. Replace only with John Deere-approved seat.