Maintenance Interval Chart—Every 600 Hours to Every 6000 Hours
Maintenance Interval Chart — 600 Hours
to 6000 Hours
|
Item
|
Every 600 Hours
|
Yearly
|
Every 1000 Hours
|
Every 2000 Hours or Annually 1
|
Every 6000 Hours/Six Years1
|
|
Service air filter element and hoses.
|
•
|
|
|
|
|
|
Change front axle oil.
|
•
|
|
|
|
|
|
Check brake adjustment.
|
•
|
|
|
|
|
|
Check wheel bolt torque.
|
|
•
|
|
|
|
|
Change engine oil and filter if less than 400 hours of operation.
|
|
•
|
|
|
|
|
Drain water from fuel tank and replace fuel filter if less than
400 hours of operation.
|
|
•
|
|
|
|
|
Check all hoses and clamps.
|
|
•
|
|
|
|
|
Check engine valve clearance. See your John Deere dealer.
|
|
|
•
|
|
|
|
Drain, flush, and refill engine cooling system 2
when coolant is NOT checked annually or NOT serviced with the
pre-diluted John Deere Cool-Gard™ II3
|
|
|
|
•
|
|
|
Drain, flush, and refill engine cooling system 4
when coolant is checked annually and serviced with the pre-diluted
John Deere Cool-Gard™
|
|
|
|
|
•
|
|
Cool-Gard is a trademark of Deere & Company
1 If Cool-Gard II is not used and coolant is not
tested annually, service interval is 2000 hours/annually
2 See your John Deere dealer for service.
3 Service interval can be extended
to six years and 6000 hours thereafter if tractor coolant has been
checked annually and serviced with pre-diluted John Deere COOL-GARD
II ™.
4 See your John Deere dealer for service.
|
JC48530,0000485-19-20200810
|
|