|
Machine levers are adequately locked in neutral when the park
brake is engaged, but the machine creeps.
|
Check and adjust neutral creep.
See Park Brake Adjustment.
Check and secure cables and hardware.
|
|
Machine levers have excessive fore-aft movement with the park
brake engaged.
|
Check and align motion control levers.
Check control levers for loose hardware or excessive wear.
|
|
Machine levers are adequately locked in neutral, and no creep
exists, but the brake pedal will not fully release due to binding
in the system.
|
Back out neutral interlock adjustment set screws 1 flat and
re-check system for binding.
Add grease to neutral interlock cam.
Check and align motion control levers.
|
|
Control levers rub/contact slots in the frame when moved to
“out” position.
|
Check and align motion control levers.
|
|
Brake pedal difficult to engage.
|
Check and align motion control levers.
Add grease to neutral interlock cam.
|
|
Brake switch not engaging/disengaging
|
Check and align motion control levers.
|