Cleaning Plastic Surfaces

Avoid damage! Improper care of machine plastic surfaces can damage that surface:

• Do not wipe plastic surfaces when they are dry. Dry wiping will result in minor surface scratches.
• Use a soft, clean cloth (bath towel, diaper, automotive mitt).
• Do not use abrasive materials, such as polishing compounds, on plastic surfaces.
• Do not use degreaser.
• Do not spray insect repellent near machine.

1. Rinse hood and entire machine with clean water to remove dirt and dust that may scratch the surface.

2. Wash surface with clean water and a mild liquid automotive washing soap.

3. Dry thoroughly to avoid water spots.

4. Wax the surface with a liquid automotive wax. Use products that specifically say “contains no abrasives.”

5. Avoid damage! Do not use a power buffer to remove wax.

   Buff applied wax by hand using a clean, soft cloth.