Replacing Fuses

Avoid Damage! When replacing fuses, be sure the replacement fuse has the same fuse rating and is installed in the correct location. Failure to do so could result in damage to the electrical harness and/or electrical components.

The fuses are located on the left side of the engine compartment next to the starter.

Your machine utilizes several fuse options depending upon your Machine Model Series and Engine Model.

• All machines use one 20 amp fuse to protect the machine electrical system.
• Z900R Series use an additional 30 amp fuse to protect the machine lift system.
• Kohler carburetor engines have one 30 amp fuse to protect the engine charging system.
• Kohler EFI engines use two additional 10 amp fuses. One to protect EFI sensors one to protect MIL operations.
• Kawasaki FX730V engines use one fusible link to protect the engine charging system.

To remove fuse:

1. Remove cover from fuse holder and remove fuse.

2. Check metal clip in fuse window and discard fuse if clip is broken.

3. Install new fuse and place cover back onto fuse holder.