Cleaning Plastic Hood and Body Panel Surfaces

Avoid damage! Improper care of machine plastic surfaces can damage that surface:

• Do not wipe plastic surfaces when they are dry. Dry wiping will result in minor surface scratches.
• Use a soft, clean cloth (bath towel, diaper, automotive mitt).
• Do not use abrasive materials, such as polishing compounds, on plastic surfaces.

1. Rinse with clean water to remove dirt and dust.

2. Dry thoroughly to avoid water spots.

3. Spray Pledge® onto hood and surfaces and leave on for 30 to 60 seconds.

4. Wipe off with cheesecloth to bring out lustre.