Using Headlights and Tail Lights

Ignition key switch must be in the RUN position to operate the lights. If the ignition key switch is in the RUN position and the engine is not running, the battery will discharge if the lights are allowed to remain on for an extended period of time.

If vehicle isn’t moving for longer than 30 seconds, two of the four headlights will turn off. They will turn on again when machine reaches 2 MPH (3.2 KM/H).

• Press top of light switch to turn headlights and rear marker light on.
• Press switch to center to turn rear marker light on.

Be sure to turn lights off and turn the ignition key switch to STOP position, or lights will discharge battery.

• Press bottom of light switch to turn headlights and rear marker light off.