Using Accessory Outlet

Two outlets may be installed depending upon your machine model:

• 10 A outlet in the glove box (M-spec models equipped with HVAC and R models)
• 10 A outlet on the machine dashboard (All models)

Avoid injury! Safe operation requires your full attention. Do not wear radio or music headphones while operating machine.

Accessory must be rated at given amps for outlet or less.

The accessory plug on E-spec vehicles turns ON when the key is turned ON, and OFF when the key turned OFF. The accessory plugs on M-spec and R-spec vehicles turn ON when the key is turned ON, and will turn OFF at the end of the Exit Lighting Operation (10 seconds).

1. Remove 12 volt outlet cover and install accessory cord in the outlet.

2. Install cover in the outlet after use.