Using Front PTO (Optional)


Engaging Front PTO

  1. Reduce travel speed or stop machine.

  2. After engine has warmed, move throttle lever up to maximum engine speed.

  3. MXT014362
    MXT014362-UN-22JUL15

    Pull PTO/RIO switch (A) up. Instrument cluster PTO indicator (B) comes on when PTO is engaged.

    With the optional front PTO kit installed, the front PTO drive shaft continues to operate when the reverse travel pedal is depressed

    If Optional rear PTO kit is installed and PTO selection lever is in either rear or rear/mid position, depressing the reverse pedal disengages the PTO.



Disengaging Front PTO

Push PTO/RIO switch down to disengage PTO. Instrument cluster PTO indicator goes out.

Any PTO interlock violations cause PTO indicator to flash when PTO is not engaged.

OUO2004,0000CC1-19-20150812