Testing the Safety Start System

The engine can start with the transmission in gear. The machine has a brake pedal safety start switch. The brake pedal must be pushed down to start the engine.

1. Sit on the operator’s seat.

2. Turn ignition key switch to STOP position.

3. Lock park brake.

4. Move transmission shift lever to N (Neutral) position.

5. Turn ignition key switch to START position. Engine should not crank. Turn ignition key switch to STOP position.

6. Push down on brake pedal.

7. Turn ignition key switch to START position. Engine should crank, allowing engine to start.

8. Allow engine to run a few seconds.

9. Turn ignition key switch to STOP position.