Checking and Cleaning Emission Filter (If Equipped)

1. Park machine safely. (See Parking Safely in the SAFETY section.)

2. 
   GXAL42020-UN-04MAR13

   Inspect filter (A) for dirt and damage, wash or replace if required.

   1. Remove cover (B) and remove emission filter (A) from under rear of fender deck.

   2. Wash foam filter in a solution of warm water and liquid detergent. Do not use oil.

   3. Rinse filter thoroughly. Squeeze out excess water in a dry cloth until filter is completely dry.

      If foam filter cannot be cleaned properly or is damaged, replace with a new filter.

   4. Install foam air filter and secure with cover.

---