Remove Tractor From Crate

Avoid injury! Touching hot surfaces can burn skin. The engine, components, and fluids will be hot if the engine has been running. Allow the engine to cool before servicing or working near the engine and components.

Do not start engine prior to installing bumper.

  1. To speed pre-delivery instructions time, lower front of e-crate.

  2. PY24595
    PY24595-UN-27JUL15

    If included, remove front bumper and hardware from box strapped to e-crate and install on tractor as follows:

    1. Align bumper brackets (A) with tractor frame rails (B).

    2. Tilt front of bumper downward to avoid contact with hood (C), push bumper brackets (A) inward slightly, and slide bumper brackets into the inside of frame rails (B).


    3. PY24596
      PY24596-UN-27JUL15

      Push bumper into frame rails until tabs on bumper brackets snap into square hole (D) in frame rails.

    4. Insert pin through hole (E) from inside of frame rail. Install washer and spring locking pin Or use nut and bolt hardware. Repeat on opposite side.


  3. Remove machine from crate. Be sure to return steel Envirocrate. Call 1-800-JDLAWNS for procedure.

RM87422,0000338-19-20160518