Removing and Installing Hood


Removing

Touching hot surfaces can burn skin. The engine, components, and fluids will be hot if the engine has been running. Allow the engine to cool before servicing or working near the engine and components.

Do not operate machine with hood open. Hood must be closed for proper engine cooling and exhaust.

  1. Park machine safely. (See Parking Safely in the SAFETY section.)

  2. Let engine cool.

  3. PY43290
    PY43290-UN-29MAY17

    Open hood.


  4. Disconnect wiring harness (A).

  5. PY43291
    PY43291-UN-29MAY17

    Apply pressure to the pointed position on left side of hood and slowly lower hood. Left side pivot will release after rotating closed approximately 45 degrees. Once left side pivot releases, slide out right side pivot. Lower hood slightly and lift hood from brackets (B).



Installing

  1. Slide right side hood pivot into tractor bracket with hood in open position (left side pivot slides into place as hood closes) and slowly close hood.

  2. Connect wiring harness.

  3. Close hood.

RM87422,00006F4-19-20170529