Starting the Engine

1. Sit in the seat.

2. Disengage Mower/PTO. (See Engaging and Disengaging Mower in the OPERATING section.)

3. Fully depress Brake/Clutch Pedal.

4. 
   PY43275-UN-29MAY17

   Set Throttle (A) to Full (Rabbit).

---




5. If engine is cold:

   • Set Throttle (A) to Choke, then hold until engine starts.
   
   

6. Turn Ignition to START (not more than 5 sec).

7. Release Choke to RUN.

   Run engine at Full throttle when operating mower or other attachments.