Operation

• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening always.
• Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.
• After striking a foreign object, stop the engine, remove the spark plug wire, thoroughly inspect the snowblower for any damage, and repair the damage before restarting and operating the snowblower.
• If the unit should start to vibrate abnormally, stop the engine and check immediately for the cause.
• Stop the engine whenever you leave the operating position, before unclogging the auger or impeller housing, or discharge chute, and when making any repairs, adjustments or inspections.
• When leaving the machine unattended, disengage the power take-off, lower the attachment, lock the park brake, stop the engine, and remove the key.
• When cleaning, repairing, or inspecting, make certain the auger or impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent accidental starting.
• Do not run the engine indoors, except when starting the engine and for transporting the snowblower in or out of the building. Open the outside doors; exhaust fumes are dangerous.
• Do not clear snow across the face of slopes, go up and down. Exercise extreme caution when operating on slopes. Do not attempt to clear steep slopes.
• Never operate the snowblower without proper guards, and other safety protective devices in place.
• Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.
• Do not overload the machine capacity by attempting to clear snow at too fast a rate.
• Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing.
• Do not carry passengers.
• Never direct discharge at bystanders or allow anyone in front of the unit.
• Disengage power to the auger or impeller when the snowblower is transported or not in use.
• Use only attachments and accessories approved by the manufacturer of the snowblower (such as wheel weights, counterweights, and cabs).
• Never operate the snowblower without good visibility or light.