Removing Discharge Chute Cables

1. When removing the black cable shield (A) an angle bracket will fall from underneath the attachment. This bracket needs to be installed again when the black cable shield is installed.

   Park machine safely. (See Parking Safely in the SAFETY section.)

2. 
   MXT013831-UN-24MAR15

   Remove black cable shield (A) and angle bracket by removing four locknuts and cap screws (B).

---




3. 
   MXT013832-UN-24MAR15

   Loosen locknuts (A) on discharge chute.

---




4. For ease of assembly and proper cable routing, remove one cable at a time.

   Remove cables (B) from attachment.

5. 
   MXT013833-UN-24MAR15

   Remove cables from pulleys (A).

---




6. Install new cables on pulleys.