Vibration Measurements

Hand/Arm Measured Per EN ISO 5395-1
X106 without mower deck vibration total value to which the hand-arm system is subjected does not exceed 2.5 m/s2
X106 with 42C 107 cm mower deck vibration total value to which the hand-arm system is subjected does not exceed 2.5 m/s2
X126 without mower deck vibration total value to which the hand-arm system is subjected does not exceed 2.5 m/s2
X126 with 42C 107 cm mower deck vibration total value to which the hand-arm system is subjected does not exceed 2.5 m/s2
X166 without mower deck vibration total value to which the hand-arm system is subjected does not exceed 2.5 m/s2
X166 with mower deck vibration total value to which the hand-arm system is subjected does not exceed 2.5 m/s2
X166 with 48TD 122 cm Mower Deck..............2.6 m/s2
Uncertainty K..............0.5 m/s2
Whole Body Measured Per EN ISO 5395-1
X106 without Mower Deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X106 with 42C 107 cm Mower Deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X126 without Mower Deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X126 with 42C 107 cm Mower Deck..............0.8 m/s2
Uncertainty K..............0.1 m/s2
X166 without Mower Deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X166 with 48TD 122 cm Mower Deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2

The value listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in EN ISO 5395-1.