Starting the Engine

1. Operator must sit on the seat.

2. Disengage attachment engagement lever/switch (See Engaging and Disengaging Mower in the OPERATING section.)

3. Fully depress brake pedal.

4. 
   APY04461-UN-04JUN18

   Push throttle lever (A) forward to full throttle position (B).

   Machines equipped with ReadyStart Automatic Choke system deliver the correct amount of fuel to the carburetor so there is no need to choke. However, in winter weather (or adverse conditions) choking may be required.

---




5. Turn ignition to START (not more than 5 seconds).

6. If engine is cold:

   • Push throttle lever (A) into choke area (C) and hold.
   • Turn ignition to START (not more than 5 seconds).
   • Release choke to full throttle position. Run engine at full throttle when operating mower or other attachments.