Replacing Fuses

Avoid Damage! When replacing fuses, be sure the replacement fuse has the same fuse rating and is installed in the correct location. Failure to do so could result in damage to the electrical harness and/or electrical components.

The fuses are located on the left side of the engine compartment next to the starter.

Your machine utilizes several fuse options depending upon your Machine Model Series and Engine Model.

• Z700E and Z700M series machines use one 20 amp fuse to protect the machine electrical system.
• Z700R series machines use one 20 amp fuse for electrical system protection as well as one 3 amp fuse for protection of the 12V power outlet.

To remove fuse:

1. Remove cover from fuse holder and remove fuse.

2. Check metal clip in fuse window and discard fuse if clip is broken.

3. Install new fuse and place cover back onto fuse holder.