Mounting Frame Hardware
5410, 5500, 5510 Tractors

IMPORTANT: Initial mounting frame hardware torque is critical to prevent loosening and possible damage to the tractor. Tighten cap screws to specified torque.

Mounting Frame Hardware
  Description Size Torque Specification
A Cap Screw
Flat Washer		 M16 x 70
17 x 34 x 4 mm		 275 N·m (200 lb-ft)
B Cap Screw
Flat Washer		 M20 x 55
21 x 42 x 5 mm		 530 N·m (400 lb-ft)
C* Cap Screw
Flat Washer
Flange Nut		 M20 x 65
21 x 42 x 5 mm
M20

530 N·m (400 lb-ft)
* Cross tie hardware is hidden in this illustration.

 
W01773

AG,WX20570,117 -19-01JUL98-1/1