Servicing Tractor Air Intake Filter
 CAUTION:
Help prevent bodily injury from accidental lowering of loader. Do not service air filter with loader elevated and unsupported. Engage parking brake and/or place transmission in "PARK", lower loader to ground or on safety stands, shut off tractor engine, relieve hydraulic pressure and remove key.
Normally, access to filter can be made with bucket flat on ground.
However, due to tractor size and tire variations, it may be necessary to do one of the following:
-
Dump bucket fully and lower loader to ground.
-
If equipped with a forklift or bale fork, raise loader to required height and place safety stands under frame of attachment. Lower attachment on stands, relieve hydraulic pressure and ensure weight of loader is fully supported by safety stands.
-
If not equipped with an attachment, raise loader to required height and place safety stands under "boom arms". Lower loader on stands, relieve hydraulic pressure and ensure weight of loader is fully supported by safety stands.
|
|
