Every 8 Hours or Daily
Checking Gear Case Oil Level
NOTE:
Perform the following procedures on all three gear cases. Right-hand side shown.
Remove dipstick/vent (A). Oil level should be between lines (B). Add John Deere GL-5 GEAR LUBRICANT, or equivalent, if necessary.
Install dipstick/vent.
A-Dipstick/Vent
B-Lines
|
|
|
|
AG,OUMX005,1033 -19-09AUG99-1/3
|
PTO Driveline-Pull-Type
|
Main PTO Driveline
Intermediate Driveline-to-Main PTO Driveline
Intermediate Driveline-to-Gear Case End
|
|
|
AG,OUMX005,1033 -19-09AUG99-2/3
|
Driveline-to-Gear Case End
|
Driveline Middle
|
PTO Driveline-Lift-Type and Semi-Mount
|
Driveline-to-Tractor End
|
|
|
AG,OUMX005,1033 -19-09AUG99-3/3
|
|
