OMW45015: MX8 and MX10 Rotary Cutters, Block File: AG_OUMX005_806_19

Install Tailwheels

NOTE: Install lock nuts with flat side toward wheel.

Install tailwheel with four 1/2 x 1-1/2 in. round head bolts and lock nuts. Install lock nuts opposite side of spindle hub. Tighten lock nuts to specifications.

Specification

Tailwheel Lock Nuts -Torque

110 N·m

(80 lb-ft)

AG,OUMX005,806 -19-03JUN99-1/2

NOTE: Straps are installed in location shown for initial setup. Reposition straps (A) according to desired cutting height. See ADJUSTING CUTTING HEIGHT/TAILWHEEL POSITION (LIFT-TYPE) in Preparing the Cutter section.

A-Strap (2 used)

AG,OUMX005,806 -19-03JUN99-2/2