A-Flange Head Cap Screw, M10 x 25 mm (12 used) B-Lock Nut, M10 (14 used)
C-Washer, 10.5 x 30 x 2.5 mm (8 used) D-Support (2 used)
E-Chain Link (66 used) F-Rod (2 used) G-Flange Head Cap Screw, M10 x 30 mm (2 used)
H-Shield (2 used)
Tighten all mounting hardware AFTER all shields have been installed.
AG,OUMX005,812 -19-03JUN99-1/1
