Install Bellcrank and Hitch

1. Assemble M24 jam nut (C), M24 x 125 mm cap screw (B) and bellcrank (A), as shown.

A-Bellcrank
B-Cap Screw, M24 x 125 mm
C-Jam Nut, M24

AG,OUMX005,815 -19-03JUN99-1/3

2. Align bellcrank (B) with leveling rod (A) and insert 24 x 75 mm pin (C).

A-Leveling Rod
B-Bellcrank
C-Pin, 24 x 75 mm

AG,OUMX005,815 -19-03JUN99-2/3

3. Wrap a lifting strap around hitch and attach to a hoist.

4. Position hitch between masts.

5. Insert 36 x 215 mm pin (C). Retain with two 10 x 65 mm spring pins.

6. Lower hitch toward front of machine and position bellcrank (B) in location shown.

7. Align bore in bellcrank with mast and hitch. Insert 36 x 215 mm pin (A) and retain with two 10 x 65 mm spring pins.

A-Pin, 36 x 215 mm
B-Bellcrank
C-Pin, 36 x 215 mm

AG,OUMX005,815 -19-03JUN99-3/3