Install Hitch Pins and Hose Holder

NOTE: Install hitch pins according to tractor hitch type. See Preparing the Cutter section for correct hitch pin positions. Hitch pin illustrated is in position for a tractor with a Quick Coupler hitch

1. Install hitch pins (C) and quick-lock pins (B).

2. Install hose holder (A) with one M12 x 30 mm cap screw, 11 x 30 x 2 mm washer and lock nut.

3. Route hydraulic hose through holder.

A-Hose Holder
B-Quick-Lock Pin (2 used)
C-Hitch Pin (2 used)

AG,OUMX005,823 -19-03JUN99-1/1