|
1.
Review Operator's manual and check adjustments.
2.
Lubricate complete machine. (See Lubrication and Maintenance section.)
3.
Check gear case oil levels. Fill as necessary. (See Lubrication and Maintenance section.)
4.
Pull-Type and Semi-Mount;
-
Check condition of hydraulic hose(s) and connections. Repair if necessary.
-
Attach hydraulic hose(s) to tractor hydraulics and extend cylinder rod fully.
5.
If equipped, check all electrical harnesses and lighting. Repair or replace as necessary.
6.
Pull-Type with used aircraft tires; Check air pressure in tires. (See Lubrication and Maintenance section.)
|
7.
Check all hardware for tightness.
IMPORTANT:
Slip clutch components must be free to rotate when necessary. After long idle periods, linings of slip clutch may draw moisture. Linings may bond to metal parts causing slip clutch to be ineffective, resulting in machine damage.
8.
Free slip clutch and turn out four set screws fully. (See FREEING SLIP CLUTCH in Service section.)
9.
If any major parts have been replaced, make sure they run properly.
|