Swivel Clevis Hitch Kit (Pull-Type)

Clamps to tractor drawbar with hardened jaws and a threaded pin. This design saves wear on both drawbar and clevis. Provides simple hookup.

Depending on tractor drawbar height (ground-to-top of drawbar), swivel clevis hitch can be installed in two different positions:

  • Up-For drawbar height 381 mm (15 in.) or higher (shown)
  • Down-For drawbar height less than 381 mm (15 in.)

Install swivel clevis hitch in place of original clevis using existing mounting hardware. Discard original clevis.

W03468

AG,OUMX005,832 -19-03JUN99-1/1