|
Overheated
|
Clutch slipping.
|
Make sure all four set screws on front of clutch are turned out (counterclockwise) fully. Repair or replace if necessary. (See your John Deere dealer.)
|
|
|
Excessive ground speed in heavy conditions.
|
Reduce ground speed.
|
|
|
Excessive scalping.
|
Adjust cutting height. (See procedure in Operating the Cutter section.)
|
|
|
|
Adjust tractor wheel tread. (See Preparing the Tractor section.)
|
|
Seized
|
Prolonged storage in damp conditions.
|
Free up slip clutch. (See FREEING SLIP CLUTCH in Service section.)
|
|
|
|
Inspect clutch linings and repair or replace as necessary. (See your John Deere dealer.)
|