A-Flange Head Cap Screw, M10 x 25 mm (10 used)
B-Lock Nut, M10 (20 used)

C-Bracket (2 used)
D-Rubber Deflector
E-Strap (2 used)

F-Washer, 10.5 x 30 x 2.5 mm (10 used)

G-Flange Head Cap Screw, M10 x 30 mm (10 used)

1. Attach rubber deflector (D) and straps (E) to brackets (C). Do not tighten.

2. Install brackets (C) under cutter deck. Do not tighten.

3. Tighten rubber deflector (D) and straps (E).

4. Tighten Brackets (C).

AG,OUMX005,856 -19-08JUN99-1/1