Assembling Slip Clutch

Assemble slip clutch in reverse order of disassembly using the following instructions:

  • Install belleville spring (C) with concave side facing away from yoke end.

    IMPORTANT: To avoid driveline damage, DO NOT overtighten cap screws and lock nuts. A gap must be left between ring (B) and belleville spring (C).

  • Tighten cap screws and lock nuts (D) leaving a gap (A) between ring (B) and spring (C) according to specifications.

Specification

Ring-to-Spring -Gap 1 mm (0.040 in.)


A-Gap, 1 mm (0.040 in.)
B-Ring
C-Belleville Spring
D-Cap Screw and Lock Nut (8 used)

W03554

AG,OUMX005,913 -19-29JUN99-1/1