Connecting Tail/Warning Light Wiring Harness to Tractor (If Equipped)

NOTE: Field installation of 7-Terminal Auxiliary Electric Kit (RE17282) is required if towing tractor is not equipped with an electrical outlet.

Make sure cutter tail and warning lights operate with tractor tail and warning lights and turn signals.

Connect tail/warning light harness plug (A) to seven-terminal outlet on tractor. Check tail/warning light function. (See LIGHTING ENHANCEMENT MODULE OPERATION in Transporting section.)

Terminal Circuit Function Wire Color
1 G Ground Black
2   Open  
3 LTRN LH Turn / Warning Light Yellow
4   Open  
5 RTRN RH Turn / Warning Light Green
6 TAIL Tail Lights Brown
7   Open  

 
RW55134

Tractor 7-Terminal Outlet

W03539

Cutter Tail/Warning Light Plug


A-Plug

AG,OUMX005,952 -19-05JUL99-1/1