HX10 Rotary Cutter Specifications1

  Lift-Type Pull-Type Semi-Mount Semi-Mount with Hydraulic Offset
TRACTOR REQUIREMENT
Horsepower (minimum) 60 kW (80 hp) 37 kW (50 hp) 37 kW (50 hp) 37 kW (50 hp)
Power Take-Off (PTO) 540 or 1000 rpm (1-3/8 in. shaft) 540 or 1000 rpm (1-3/8 in. shaft) 540 rpm 540 rpm
Hitch Type Category 2, 3 or 3N draft link hitch with or without Quick Coupler Drawbar Category 2, 3 or 3N draft link hitch with or without Quick Coupler Category 2, 3 or 3N draft link hitch with or without Quick Coupler
Hydraulics None Single SCV Single SCV Dual SCV
CUTTING WIDTH 3.20 m (10 ft 6 in.)
CUTTING HEIGHT 25-305 mm (1-12 in.)
OVERALL WIDTH 3.35 m (11 ft)
OVERALL LENGTH 2.75 m (9 ft) 4.04 m (13 ft 3 in.) 2.79 m (9 ft 2 in.) 2.92 m (9 ft 7 in.)
BODY DEPTH 267 mm (10-1/2 in.)
DECK THICKNESS
Upper Deck 3.5 mm (9/64 in.)
Lower Deck 3.5 mm (9/64 in.)
Total 7 mm (9/32 in.)
SKIRT THICKNESS 6 mm (1/4 in.)
DRIVELINE PROTECTION
Tractor-to-Center Gear Case Self-Adjusting Slip Clutch
Center-to-Outer Gear Cases Shock Absorbing Shafts
GEAR CASE POWER RATING
Center (Continuous)
540 rpm 80 kW (110 hp)
1000 rpm 85 kW (120 hp) 85 kW (120 hp) N/A N/A
Center (Peak)
540 rpm 100 kW (140 hp)
1000 rpm 150 kW (200 hp) 150 kW (200 hp) N/A N/A
Outer (Continuous) 60 kW (85 hp)
Outer (Peak) 100 kW (135 hp)

 

1 (Specifications and design are subject to change without notice.)

AG,OUMX005,883 -19-25JUN99-1/2

BLADES
Holder Round Pan
Standard Suction, 13 x 102 mm (1/2 x 4 in.)
Optional Flat, 13 x 102 mm (1/2 x 4 in.)
Blade Tip Speed
540 rpm PTO 84 m/s (16,582 ft/min)
1000 rpm PTO 86 m/s (16,849 ft/min) 86 m/s (16,849 ft/min) N/A N/A
BRUSH CUTTING CAPACITY 50 mm (2 in.)

 

  Lift-Type Pull-Type Semi-Mount Semi-Mount with Hydraulic Offset
HYDRAULIC OFFSET (To Right or Left-Hand Side) N/A N/A N/A 0-330 mm (0-13 in.)
WEIGHT (Cutter less Safety Shields and Attachments) 806 kg (1777 lb) 930 kg (2049 lb) 832 kg (1836 lb) 875 kg (1929 lb)
ATTACHMENTS AND WEIGHTS
Front Rubber Safety Shield 50 kg (110 lb)
Front Chain Safety Shield 62 kg (137 lb)
Rear Solid Safety Shield 43 kg (95 lb)
Rear Chain Safety Shield 61 kg (135 lb)
Safety Tow Chain N/A 2.3 kg (5 lb) N/A N/A
Third Tailwheel Support (less tire) 28 kg (62 lb) 19 kg (42 lb) 22 kg (48 lb) 22 kg (48 lb)
Fourth Tailwheel Support (less tire) N/A 19 kg (42 lb) N/A N/A
Puncture Proof Laminated Tire 30 kg (65 lb)
Used Aircraft Tire and Wheel N/A 23 kg (50 lb) N/A N/A
Tail/Warning Lights 16 kg (35 lb)
SMV Sign 2 kg (4 lb)
TIRES
Puncture Proof Laminated 387 mm (15 in.) O.D. 533 mm (21 in.) O.D. 387 mm (15 in.) O.D. 387 mm (15 in.) O.D.
Used Aircraft N/A 22 x 7.7 x 12 in., 16 PR N/A N/A
GEAR CASE CAPACITIES (Approximate)
Center 2.3 L (2.4 U.S. qt)
Outer 2.2 L (2.3 U.S. qt)

 

AG,OUMX005,883 -19-25JUN99-2/2