Leveling Bucket

NOTE: Bucket top is parallel to bottom. Bucket is level when bucket top is level.

Bucket level indicator installation instructions are provided with the loader Predelivery Manual.

With bucket level indicator (B) properly adjusted, bucket is level when bottom of cap (A) is flush with top of indicator as viewed from operator's seat. (See ADJUSTING BUCKET LEVEL INDICATOR in Service section.)

NOTE: Indicator position for a bucket will not be the same for a bale fork or forklift. When using it for an attachment other than a bucket, level the attachment and reposition the indicator on the bucket cylinder.

A-Cap
B-Level Indicator

OUO6038,0000192 -19-30NOV00-1/1