|
Slow or Jerky Operation
|
Cold hydraulic oil.
|
Run engine and cycle loader.
Use low viscosity hydraulic oil in cold weather. (See your tractor Operator's Manual or your John Deere dealer.)
|
|
|
Low hydraulic oil.
|
See tractor Operator's Manual.
|
|
|
Poppet style selective control valve set slow.
|
Increase to fastest rate. (See your tractor Operator's Manual.)
|
|
|
Engine speed too slow.
|
Increase engine speed.
|
|
|
Internal cylinder leakage.
|
Test cylinders for internal leaks. Install cylinder repair kit. (See your John Deere dealer.)
|
|
|
Faulty tractor hydraulic system.
|
See your tractor Operator's Manual or your John Deere dealer.
|
|
|
"Flow checking" or faulty quick-connect coupler.
|
Replace coupler. See your John Deere dealer.
|
|
|
Overloading bucket or fork.
|
Reduce load. See how lift capacity is determined in Specifications section.
|
|
|
Incorrect control cable adjustment on loader operated with independent control valve.
|
See your John Deere dealer.
|
|
Oil Leaks
|
Loose connections.
|
Tighten fittings.
|
|
|
External cylinder leakage.
|
Install cylinder repair kit. (See your John Deere dealer.)
|
|
|
External loader control valve leakage.
|
Install repair kit. See your John Deere dealer.
|
| Symptom |
Problem |
Solution |
|
Lack of Lift Capacity
|
Load is greater than loader lift capacity.
|
See how lift capacity is determined in Specifications section.
|
|
|
Internal lift cylinder leakage.
|
Test cylinders for internal leaks. Install cylinder repair kit. (See your John Deere dealer.)
|
|
Heavily Loaded Loader Lowers When Control is Moved to Raise Position
|
Lift check in control valve not working properly.
|
Repair control valve. (See your John Deere dealer.)
|
|
Heavily Loaded Bucket or Attachment Dumps When Control is Moved to Roll-Back Position
|
Lift check in control valve not working properly.
|
Repair control valve. (See your John Deere dealer.)
|
|
Loader Operation Does Not Correspond With Control Lever Movement
|
Hydraulic hoses connected wrong.
|
Correct hose connections. (See IDENTIFYING HOSE CONNECTIONS in Service section.)
|
|
|
Defective quick-connect coupler.
|
Replace coupler. (See your John Deere dealer.)
|
|
Loader Settles from Raised Position
|
Internal leak in control valve or cylinder.
|
Install repair parts. (See your John Deere dealer.)
|