726 Loader Specifications on 7520 Tractor1

W05471

NOTE: Capacities are shown measured to bucket bottom midpoint. Objects such as round bales or bins on a forklift, move the weight out from this point, decreasing lift capacity.

Dimensions are in compliance with ASAE Standard S301.3.

1(Specifications and design subject to change without notice.)

OUO6038,00017A8 -19-23JUL02-1/2

Tractor Model 7520
Front Tires 14L-16.1
Rear Tires 18.4R42
Wheelbase (WB) 2935 mm (115.5 in.)
Materials Bucket
Width 1850 mm (73 in.)
Length 967 mm (38 in.)
Mass 259 kg (571 lb)
Hydraulic System
Rated Flow 96 L/min (25.4 gpm)
Maximum Pressure 19500 kPa (195 bar) (2828 psi)
Cycle Times (in seconds)
Loader Raise Time 4.9
Loader Lower Time 4.6
Bucket Dump Time 3.7
Bucket Rollback Time 4
Lift Height (Maximum)
To Pivot Pin (A) 4225 mm (166.3 in.)
Clearance
Bucket Level (B) 4070 mm (160.2 in.)
Bucket Dumped (C) 3388 mm (133.4 in.)
Overall Length (I)+(F) 5337.3 mm (210 in.)
Digging Depth (H) 92 mm (3.6 in.)
Reach
At Maximum Lift Height (D) 1063 mm (41.9 in.)
Bucket on Ground (F) 2126 mm (83.7 in.)
Angles (Maximum)
Dump (E) 62.9°
Dump at Ground 131.8°
Rollback (G) 33.8°
Overall Height
In Carry Position (J) 2030 mm (79.9 in.)
Lift Capacity
To Maximum Height at Pivot Point (U) 2024 kg (4463 lb)
To Maximum Height (V) 1395 kg (3076 lb)
To 1.5 m (59 in.) at Pivot Point (W) 2876.5 kg (6343 lb)
To 1.5 m (59 in.) (X) 2154.5 kg (4751 lb)
Breakout Force
At Pivot Point (Y) 38 900 N (8746 lb force)
800 mm (31.5 in.) Forward of Pivot Point (Z) 27 100 N (6093 lb force)
Bucket Rollback Force
At Maximum Height (VV) 17 200 N (3867 lb force)
At 1.5 m (59 in.) Lift Height (XX) 20 900N (4699 lb force)
At Ground Level Line (ZZ) 20 700 N (4654 lb force)

 

OUO6038,00017A8 -19-23JUL02-2/2