|
The following checklist is a reminder of very important information which should be conveyed to the customer at the time the cutter is delivered. Check off each item as it is fully explained to the customer.
[ ] John Deere warranty.
[ ] Safe and correct operation and service.
[ ] Daily and periodic inspections.
[ ] Servicing machine regularly and correctly.
[ ] Explain proper cutting procedures.
[ ] Explain correct ASAE standard dimensions for PTO hookup.
[ ] Give the Operator's Manual to the customer and encourage customer to read entire manual.
[ ] Advise customer of safety precautions that must be observed while using this cutter.
[ ] Advise the customer to set front and rear wheels accordingly, on tractors having adjustable tread width. (See Preparing the Tractor section.)
[ ] Review information on how to prepare the cutter. (See Preparing the Cutter section.)
[ ] Review recommended procedures for attaching to or detaching from tractor. (See Attaching and Detaching section.)
|
[ ] Recommended transporting information. (See Transporting section.)
[ ] Review equipment protection feature (i.e. slip clutch).
[ ] Review cutter operation. (See Operating the Cutter section.)
[ ] Make customer aware of all optional equipment offered for this machine. (See Attachments section.)
[ ] Recommended lubricants. (See Lubrication and Maintenance section.)
[ ] Review service intervals and lubrication points. (See Lubrication and Maintenance section.)
[ ] Review all adjustments. (See Service section.)
[ ] Recommended machine storage. (See Storage section.)
[ ] Have customer record machine serial number in the Specifications section.
[ ] John Deere parts and service.
[ ] Remove and file this page.
(Date Delivered)_________________________
(Signature)_________________________
|