Never operate cutter when other people are in the vicinity. Debris can be thrown hundreds of feet. Keep all shields in place. Including those on discharge opening at front and rear of deck.
Before starting machine, lower to the ground. Engage tractor PTO and gradually increase the speed.
Operate tractor at rated PTO speed. If engine speed is too slow or too fast, machine may not perform properly.
Where conditions make it necessary to slow ground speed, shift to a lower gear rather than reducing engine speed. The engine will maintain rated speed and keep cutter running at optimum cutting speed.
Operate machine from tractor seat only.
Never adjust machine while in motion.
Slow down when turning or traveling over rough ground.
Avoid holes when operating on hillsides. Tractor roll-over could result.
Shut off tractor engine and engage tractor parking brake and/or place transmission in "Park" when leaving tractor. Remove key when leaving tractor unattended.
Components behind shields may rotate several minutes after power is shut off. Look and listen for evidence of rotation before removing shielding.
CAUTION:
To help prevent severe injury or death to you or someone else:
