Every 8 Hours or Daily
Keeping Cutter Clean
IMPORTANT:
Avoid machine damage due to build up of debris, if any, on cutter deck. Clean cuttings from deck DAILY or more often if necessary.
Build up of material may interfere with driveline, cause overheating of gear case resulting in component damage or cause deck to be corroded due to moisture in material.
|
|
|
|
AG,OUO1078,317 -19-19NOV99-1/5
|
Driveline-to-Gear Case End
|
Driveline-to-Tractor End
|
PTO Driveline-MX5 and MX6
|
|
|
|
AG,OUO1078,317 -19-19NOV99-2/5
|
Driveline-to-Gear Case End
|
Driveline-to-Tractor End
|
|
|
AG,OUO1078,317 -19-19NOV99-3/5
|
|
|
AG,OUO1078,317 -19-19NOV99-4/5
|
Checking Gear Case Oil Level
Remove dipstick/vent (A). Oil level should be between lines (B). Add John Deere GL-5 GEAR LUBRICANT, or equivalent, if necessary.
Install dipstick/vent.
A-Dipstick/Vent
B-Lines
|
|
|
|
AG,OUO1078,317 -19-19NOV99-5/5
|
|
