MX5, MX6 and MX7 Rotary Cutter Specifications1

  MX5 MX6 MX7
TRACTOR REQUIREMENT
Horsepower (minimum) 18.6 kW (25 hp) 22.4 kW (30 hp) 37 kW (50 hp)
Power Take-Off (PTO) 540 rpm 540 rpm 540 rpm
Hitch Type Integral Hitch (Category 1 adaptable to 2, 3-Point hitch with or without Quick Coupler) Integral Hitch (Category 1, adaptable to 2, 3-Point hitch with or without Quick Coupler) Integral Hitch (Category 2
with or without Quick Coupler, 3N with Quick Coupler)
CUTTING WIDTH 1.52 m (60 in.) 1.83 m (72 in.) 2.13 m (84 in.)
CUTTING HEIGHT 25-241 mm (1-9-1/2 in.)
OVERALL WIDTH 1624 mm (64 in.) 1910 mm (75 in.) 2242 mm (88 in.)
OVERALL LENGTH 2595 mm (102 in.) 2882 mm (114 in.) 3210 mm (126 in.)
BODY DEPTH 216 mm (8-1/2 in.)
DECK THICKNESS
Upper Deck 3 mm (1/8 in.) 3.5 mm (9/64 in.) 3.5 mm (9/64 in.)
Lower Deck 3 mm (1/8 in.) 3.5 mm (9/64 in.) 3.5 mm (9/64 in.)
Total 6 mm (1/4 in.) 7 mm (9/32 in.) 7 mm (9/32 in.)
SKIRT THICKNESS 6 mm (1/4 in.)
DRIVELINE
Size Category 3 Category 4
Protection (Tractor-to-Gear Case) Self-Adjusting Slip Clutch
GEAR CASE POWER RATING
Continuous 41 kW (55 hp)
Peak 45 kW (61 hp) 69 kW (92 hp)
BLADES
Holder Round Pan (Stump Jumper)
Type Suction, 13 x 102 mm (1/2 x 4 in.)
Blade Tip Speed (540 PTO rpm) 72.9 m/s (14,347 ft/min) 86.6 m/s (17,040 ft/min) 88.8 m/s (17,477 ft/min)
BRUSH CUTTING CAPACITY 50 mm (2 in.)
WEIGHT (Cutter Less Safety Shields and Attachments) 330 kg (728 lb) 428 kg (944 lb) 512 kg (1130 lb)
ATTACHMENTS AND WEIGHTS
Front Rubber Safety Shield 5 kg (10 lb) 6 kg (12 lb) 7 kg (1130 lb)
Front Chain Safety Shield 18 kg (40 lb) 22 kg (47 lb) 25 kg (58 lb)
Rear Chain Safety Shield 25 kg (55 lb) 28 kg (62 lb) 30 kg (65 lb)
Second Tailwheel Support N/A N/A 36 kg (79 lb)

 

1(Specifications and design are subject to change without notice)

AG,OUO1078,328 -19-19NOV99-1/2

TIRES
Puncture Proof Laminated (Width x OD) 89 x 387 mm (3-1/2 x 15-1/4 in.)
WHEEL BEARING(S) Bushings Bushings Roller Bearings
GEAR CASE CAPACITY (Approximate) 1.9 L (2.0 U.S. qt)

 

AG,OUO1078,328 -19-19NOV99-2/2