OMW49246: MX5, MX6 and MX7 Rotary Cutters, Block File: AG_OUO1078_349_19

causym CAUTION: To avoid personal injury, use locking pins to hold drawbar stationary when operating PTO driven implements.

IMPORTANT: Failure to reposition drawbar can result in serious powerline damage.

1. Slide drawbar (A) toward front of tractor as far as possible.

2. Remove locking pins and move drawbar (A) to either side of hitch support. Keep away from center position.

3. Install locking pins.

4. Remove drawbar (A) if necessary.

John Deere 4000 Series Tractor Shown

A-Drawbar

AG,OUO1078,349 -19-28JAN00-1/1