OMW49246: MX5, MX6 and MX7 Rotary Cutters, Block File: AG_OUO1078_362_19

MX5 and MX6

Assemble slip clutch in reverse order of disassembly using the following instructions:

Install belleville spring (C) with concave side facing away from yoke end.
IMPORTANT: To avoid driveline damage, DO NOT overtighten cap screws and lock nuts. A gap must be left between clutch plate (B) and belleville spring (C).
Tighten cap screws and lock nuts (D) leaving a gap (A) between clutch plate (B) and spring (C) according to specifications.

Specification

Clutch Plate-to-Spring -Gap

4 mm

(0.157 in.)

A-Gap
B-Clutch Plate
C-Belleville Spring
D-Cap Screw and Lock Nut (6 used)

AG,OUO1078,362 -19-28JAN00-1/2

MX7

Assemble slip clutch in reverse order of disassembly using the following instructions:

Install belleville spring (C) with concave side facing away from yoke end.
IMPORTANT: To avoid driveline damage, DO NOT overtighten cap screws and lock nuts. A gap must be left between clutch plate (B) and belleville spring (C).
Tighten cap screws and lock nuts (D) leaving a gap (A) between clutch plate (B) and spring (C) according to specifications.

Specification

Clutch Plate-to-Spring -Gap

5.7 mm

(0.224 in.)

A-Gap
B-Clutch Plate
C-Belleville Spring
D-Cap Screw and Lock Nut (8 used)

AG,OUO1078,362 -19-28JAN00-2/2