Install Tailwheel-MX5 and MX6

1. Wrap a lifting strap around axle support tube and attach to a hoist.

2. Install tailwheel using M16 x 180 cap screw, 16.26 x 25.4 x 137 mm spacer and M16 lock nut (A). Tighten lock nut to specifications.

Specification

Tailwheel Lock Nut -Torque 240 N·m (177 lb-ft)

3. Lower tailwheel and remove lifting strap.


A-Lock Nut

W03725

AG,OUO1078,380 -19-09FEB00-1/1