After the cutter has been completely set up, inspect it to be sure it is in good running condition before delivering it to the customer. The following checklist is a reminder of important points to inspect. Check off each item as it is found satisfactory or after proper adjustment has been made.

[ ] All safety shields and guards are in place.

[ ] Fill gear cases with oil. (See Assembly section.)

[ ] Check gear case for leaks.

[ ] Check gear case levels and lubrication points. (See Lubrication and Maintenance section.)

[ ] All moving parts work freely.

[ ] All hardware tight.

[ ] Decals intact and legible.

[ ] Check machine for damage. Touch up any scratches.

CAUTION: To help prevent personal injury from rotating blades or thrown objects, never walk or stand behind the cutter during operation or run-in.

[ ] Operate cutter for about one minute and check for excessive vibration or unusual gear case noises.

[ ] This cutter has been inspected and checked. To the best of my knowledge, it is ready for delivery to the customer.

(Date Set Up)________________________

(Signature)_________________________

OUO6077,0001543 -19-21FEB02-1/1